Clarity 440 - Manual (Page 21)

Caller ID Operations
VISUAL MESSAGE WAITING INDICATOR
(VMWI)
NOTE: This is a service that is provided
through your local telephone company.
If the C440 finds that there is voice message
to be retrieved, it will turn on the Message
Waiting Indicator (the ENTER key).
To retrieve the voice message, press the
ENTER key while the indicator is on. The
handset will go off-hook and dial the stored
Voicemail number.
CALLER ID INFORMATION
This function is turned off when EASY MODE
is set to ON during setup.
Caller Information
When somebody calls, the received caller
information is displayed on the LCD. If the
call is answered by this phone, this caller
information is considered “old”. Otherwise,
the Caller ID information will be stored in the
call log. Information which has not been
reviewed will be considered as “new call”.
The NEW CALL LED will blink. The top row
displays the time and date of the call. The
second row displays the caller’s ID or is blank
if there is no information. The third row dis-
plays the incoming telephone number. If the
number is longer than twelve (12) digits, the
LCD will toggle the displayed number
between the first 12 digits and the remaining
digits.
Receiving Call Waiting Caller ID
When you are on an existing call, you will
hear a beep and the display will show
incoming call waiting Caller ID information.
If you access the call waiting call, the
Caller ID information will disappear and
the Time/Day screen will appear.
If you do not access the call waiting call,
the Caller ID information will be transferred
into the Caller log. This caller information is
considered “old”.
Unknown Call
If a call is from another country or the
caller’s number is not available,
UNKNOWN is
displayed and stored in the Caller ID log.
Blocked Call
If the number is blocked or withheld,
PRIVATE is displayed and stored in Caller
ID log.
Repeated Call
If this is a repeated call, it means the same
number called before and has not been
reviewed.
CALLER ID Review
If there is new call information, the MODE
button will flash RED.
During standby mode, press MODE button
once. LCD will display CID MODE and then
the last Caller ID information.
E
N
G
L
I
S
H
21
PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 21