beautypg.com

Fuses – HONDA 2008 Fit - Owner's Manual User Manual

Page 237

background image

If something electrical in your
vehicle stops working, check for a
blown fuse first. Determine from the
chart on pages

and

, or the

diagram on the fuse box lid, which
fuse or fuses control that device.
Check those fuses first, but check all
the fuses before deciding that a
blown fuse is the cause. Replace any
blown fuses, and check if the device
works.

Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.

Remove the cover from the fuse
box.

Check each of the large fuses in
the under-hood fuse boxes by
looking through the top at the wire
inside. Removing these fuses
requires a Phillips-head
screwdriver.

Check the smaller fuses in the
primary under-hood fuse box and
all the fuses in the interior fuse
box by pulling out each one with
the fuse puller provided in the
interior fuse box.

3.

1.

2.

4.

236

237

Fuses

Checking and Replacing Fuses

234

FUSE

BLOWN

FUSE PULLER

2008 Fit

Table Of Contents

Main Menu