beautypg.com

Haltech HT055045 User Manual

Page 10

background image

Step 3: Throttle Position Sensor 1 (TPS 1)

Release the accelerator pedal to a non-pressed state. Ensure that all
electronic throttles are connected and click calibrate to continue

Figure 12 – TPS 1 Calibration Success

Step 4: Throttle Position Sensor 2 (TPS 2)

In Twin throttle applications the Electronic Throttle Calibration wizard will
proceed to calibrate the TPS 2 automatically. This is not required with
this application and will be skipped automatically by the wizard

Figure 13 – TPS 2 Calibration Success

When successfully calibrated the ETC Status will change to “Online / Calibrated”
Once calibrated its now time to start your engine.

Figure 14 – Successful Calibration Indication

10. With the engine started and running its time to tune. This is best achieved by your

nearest engine tuner. See the listing of Haltech dealers on our website to find the one
closest to you.

Figure 15 – ECU Manager tuning page