Great Planes G-44 Widgeon Seaplane EP ARF - GPMA1151 - Manual (Page 19)

19
Glue the blocks where shown in the photo. They should be
located just below the ABS plastic window insert.
❏
5. Locate the black plastic fl oor and insert it into the fuselage.
The front of the fl oor should rest on the wood formers in the
front of the fuselage. The back of the fl oor will rest on the two
blocks you glued to the sides of the fuselage. Drill a 1/16"
[1.6mm] hole through the fl oor and into the blocks. Secure the
fl oor with two 5/64 x 3/8" [2mm x 9.5mm] washer head screws.
❏
6. You may wish to install a pilot. We used a Williams
Brothers 1/8 scale Sportsman Pilot (WBRQ1130). Glue the
pilot on the plastic fl oor on the left side.
❏
7. Mount the wing to the fuselage, securing it with two nylon
wing bolts. Install the props onto the motors. Secure the prop
with the washer that came with the motor and the 3/4" [19mm]
aluminum spinners included with the kit.