Great Planes Cosmic Wind EP ARF - GPMA1810 - Manual (Page 7)

7
ASSEMBLE THE FUSELAGE
Install the Main Landing Gear
❏ ❏
1. Insert a 2 mm axle through the right main landing
gear . Secure the axle to the landing gear with a 4 mm lock
nut . Note: the front of the main landing gear sweeps forward.
❏ ❏
2. Install a 2 mm wheel collar on the axle, then the foam
main wheel , followed by a second 2 mm wheel collar. Apply
a drop of thread locker on the 3 mm set screws and secure
the wheel collars on the axle with the set screws.
❏ ❏
3. Position the right wheel pant over the wheel and
secure it to the main landing gear with two 2 × 5 mm self
tapping screws .
❏ ❏
4. Attach the main landing gear to the fuselage with
three 2.5 × 8 mm self tapping screws.
❏
5. Repeat steps 1– 4 for the left main landing gear.
Install the Stabilizer
❏
1. Attach the wing to the fuselage with two 3 ×18 mm wing
bolts and two 3 mm fl at washers .