Great Planes Giant Revolver ARF - GPMA1425 - Manual (Page 5)

5
PREPARATIONS
❏
1. If you have not done so already, remove the major parts
of the kit from the box and inspect for damage. If any parts
are damaged or missing, contact Product Support at the
address or telephone number listed in the “Kit Inspection” on
the previous page.
❏
2. Use a covering iron with a covering sock on high heat to
tighten the covering if necessary. Apply pressure over sheeted
areas to thoroughly bond the covering to the wood.
BUILD THE WING
We recommend you begin with the right wing so that your
assembly matches the photos.
❏ ❏
1. Use your servo as a guide for the servo placement.
Place the servo so the servo arm is centered in the opening
in the cover. Use epoxy to glue the 11/16" x 11/16" x 5/16"
[20mm x 20mm x 8mm] hardwood servo mounting blocks to
the insides of the hatch covers. Allow the epoxy to cure.
KIT CONTENTS
1. Right Wing w/ Aileron
2. Left Wing w/ Aileron
3. Wing Tube
4. Spinner
5. Wheels
6. Wheel Pants
7. Landing Gear
8. Fuel Tank
9. Right Stab & Elevator
10. Left Stab & Elevator
11. 19 - 3/4" [ 501mm] Stab Tube
12. 9 -1/2" [ 241mm] Stab Tube
13. Rudder
14. Tail Wheel Assembly
15. Fuselage
16. Cowl
Kit Contents
1
9
6
14
2
10
4
12
8
16
7
15
3
11
5
13