Great Planes Citabria EP ARF - GPMA1127 - Manual (Page 7)

7
❏
3. Slide one of the long brace doublers onto a 2 x 390mm
carbon rod . Slide the carbon rod through the brace support
in the wing and into the small hole in the landing gear support.
With the long brace doubler on the carbon rod, insert the
other end of the carbon rod in the slot at the tip of the wing.
The carbon rod should go through the long brace doublers
and into the wing.
❏
4. Slide a second long brace doubler onto another 2 x
390mm carbon rod. Slide the carbon rod through the brace
support. Slide a
medium brace doubler on the rod and then
insert the end of the rod in the slot in the bottom of the vertical
fuselage. Insert the other end of the rod in the slot at the tip
of the wing.
❏
5. Go back to step 3 and install the carbon rods on the other
side of the fuselage. Check that all the carbon rods are straight.