Graph Tech Ghost Acoustic MIDI User Manual
Page 14
Putting plugs onto pickup wires
Once the pickup wires have been threaded through the
7/64” holes in the bottom of the 1/8” saddle slot, the
metal crimps on the ends of the pickup wires can be
inserted into the plastic housing without tools. Align
12
For steel-string guitars and other guitars with ra-
diused fingerboards, the Pagoda Shim lies in the
bottom of the saddle slot, and the pickup saddles
sit on top of it. It doesn’t matter which way the Pa-
goda Shim is inserted. You may need to rout your
saddle slot deeper to accommodate the pagoda
shim. The pickup saddles should not protrude more
than 1/3 of their height out of the saddle slot.
It is possible to sand the Pagoda Shim thinner, but it is very
delicate, so if you choose to do this, proceed very carefully.