Graph Tech Ghost Acoustic MIDI User Manual
Page 10
Locating ghost Components
Adding the ghost® system to your instrument
begins with careful planning. Begin by plug-
ging the components into each other and lay
them out on top of the guitar to decide the loca-
tion of each component. Choose locations that are
convenient for you, and look for space conflicts
with structural parts on the inside of the guitar.
Make sure that the harness wires are long enough
to reach the location of each component. Re-
member that any of the optional controls can be
added to the system later if you’ve left space for
it, but drilling a hole in the wrong place can be
hard to hide. Some routing may be required to fit
the components in your particular instrument.
8