Grant Instruments PCV-3000 - Manual (Page 4)

The following symbol means:
Caution: Read these operating instructions fully before use and pay particular attention to
sections containing this symbol.
Always observe the following safety precautions.
Caution! Care must be taken before every operating session, please check that:
The Spin-plate is secured tightly;
That the micro tubes are sealed correctly;
Do not use if the Spin-plate cover has any cracks or chips;
Do not open the lid until Spin-plate has stopped revolving.
If you are using more than one type of Grant Bio product, be aware that the PSU connections are common
throughout the range of units. Therefore, before connecting the unit to the PSU check Voltage and current
ratings for the particular unit.
GENERAL SAFETY
Operation of the unit must be carried out according to the given operating manual.
The unit should be saved from shocks or drops.
The unit must be stored and transported only in a horizontal position (see marking on the package).
After transport or storage allow the unit to dry out (2-3 hrs) before connecting to the mains.
Before using any cleaning or decontamination method except those recommended by the manufacturer, check
with the manufacturer that the proposed method will not damage the equipment.
Use only original accessories (rotors, pins, etc.) provided by the manufacturer and ordered specifically for this
model.
ELECTRICAL SAFETY
Connect only to the external power supply with a voltage corresponding to that on the serial number label.
Use only the external power supply unit provided with this product.
Ensure that the external power supply is easily accessible during use.
Do not plug the unit into the mains outlet without grounding, and do not use extension lead without grounding.
Before moving the unit, disconnect it from the mains outlet.
1. Safety
Page 4
Multi-spin PCV-3000
Operating Instructions
Version 2.02 - August 2012