Grant Instruments LTC2 - Manual (Page 6)

30933 V2 LTC2
Page 5 Operating Manual
www.grantinstruments.com
3.3 Safety warnings
Read the whole of these instructions. Safety may be impaired if they are not
followed.
For the LTC2, only use liquids specified in these operating instructions, within
the specified temperature range. If the alarm lamp is illuminated the liquid
temperature may be above its recommended maximum. Do not inhale the
vapours given off as they may be toxic. Liquids should be safely discarded and
replaced.
Do not use the LTC2 with flammable heat transfer liquids.
Do not use the LTC2 to heat any sample material that could cause a fire or any
other kind of hazard.
Do not use the equipment in an area where there are aggressive or explosive
chemical mixtures.
If a potentially hazardous liquid is spilt onto or inside the equipment, disconnect
it from the power supply and have it checked by a competent person.
Before moving, disconnect from the mains power supply
It is the user’s responsibility to carry out appropriate decontamination if
hazardous material is spilt on the equipment.
If the alarm lamp is illuminated do not touch the liquid or the heater, they may
be very hot. Refill carefully, a hot heater can cause a spattering of very hot
water droplets and scalding steam.
Do not touch surfaces which become hot during high temperature operation.