Grant Instruments LTC2 - Manual (Page 5)

LTC2 30933 V2
Operating Manual Page 4
www.grantinstruments.com
1.0 Use of products
The following products are covered by this operating manual:
 LTC2 & LTC2L
The products listed above are low temperature circulators designed for indoor laboratory
use by a professional user.
The LTC2 consists of a TC120 immersion thermostat combined with an R2 refrigeration
unit, with insulated hoses and clips to allow circulation of temperature control fluids to
external equipment.
2.0 How to use this operating manual
This operating manual will allow you to unpack, set-up and operate this low temperature
bath/circulator correctly and safely. Important safety information, symbols and warnings
are listed below and should be read carefully. Section 4 gives information about how to
unpack and install the product correctly. Section 5 gives operating information for the
LTC2. Product technical specifications and tips are provided in sections 6 and 7. The
warranty for this product is for FOUR YEARS and is detailed in section 8 and should be
registered by completing the on-line registration form at www.grantinstruments.com.
If there is a technical matter that this operating manual does not address, or any other
question concerning this product, please contact Grant Instruments or your local
distributor, who will be able to provide any additional information.
3.0 Safety information
3.1
Safety compliance
The LTC2 meets the requirements of international safety standard IEC 61010: Safety
requirements for electrical equipment for measurement, control, and laboratory use.
3.2
Safety symbols
The symbols below are marked on the equipment and throughout this manual to indicate:
Caution: Surfaces and heat transfer liquid can be hot during and after use.
Read this manual before using the bath.
Important safety warning.