Grant Instruments T100-MST20 - Manual (Page 6)

31083 V2 T100-MST20
Page 5 Operating Manual
www.grantinstruments.com
4.0 Operating instructions
4.1
Unpacking instructions
Standard equipment includes:
 Immersion thermostat (T100)
 Tank (MST20) includes bridge plate with hinged lid
 Tray
 Mains cord with plug
 Operating manual
Remove packing materials carefully and retain them for future shipment or storage of the
equipment.
4.2
Fitting controller to the tank
The T100-MST20 is supplied ready assembled. For cleaning purposes instructions are
provided for attachment and removal of the T100 controller.
1. Fit the T100 through the hole in the bridge plate and align using the locating threads.
Secure using the retaining nuts (1). Hand tighten only.
2. Lower the assembly onto the slots MST20 bath so that threaded posts fit into the
fixing brackets (2). Fasten with the retaining nuts provided.
3.
Fit the circulation tray in the base of the MST20 tank.
4.3
Removing the controller from the bridge plate
Allow the working liquid to cool before removing the T100 from the tank. Carefully
remove the T100 and bridge plate together from the tank by removing the retaining nuts
inside the tank. To remove the bridge plate, turn over the assembly and undo the
retaining nuts. Attach the retaining nuts to the locating threads for safe keeping.
2
1
2