GME GR100 - Manual (Page 10)

Page 10 Instruction Manual GR100
LOCaL/dX MOde
the Local/DX mode controls the receiver’s sensitivity when in the FM mode . the GR100
can be set to high sensitivity for long distance reception (DX) or low sensitivity for local
reception (LOC) .
Briefly press the Mode key six times (one press past the aMs selection) . the frequency
will be displayed along with the LOC symbol . to select Local or DX modes, briefly press
the or key . each press will alternate between a solid LOC symbol (indicating Local
mode is selected) and a flashing ‘LOC’ symbol (indicating DX mode is selected) .
When the GR100 returns to the normal display mode, a ‘LOC’ icon on the display
indicates that local mode is selected . If ‘LOC’ is not visible, DX mode is selected .
STereO/MOnO MOde
the stereo/Mono function can be selected on the FM band when the external stereo
speakers are attached . If the GR100 is only operating from the internal monitor
speaker, Mono/stereo selection is not available .
Mono
selecting Mono improves the quality of the reception when FM signals are weak or
noisy by disabling stereo detection . When Mono is selected, there is no indication on
the display
Stereo
select stereo for normal stereo listening on the FM bands . When stereo is selected and
a stereo signal is being received, ‘st’ is displayed .
to switch between Mono and stereo modes, press and hold the Mode key for 3
seconds . the st icon will appear or disappear indicating the current selection .
iNSTALLATiON
rear Panel Connections
Left speaker Output
Right speaker Output
antenna socket
DC Power