GME TX6100 User Manual
Page 15

TX6100
INSTRUCTION MANUAL
PAGE 15
confirm and store your selection. When
the VOX is enabled, ‘VOX’ is visible on
the display.
5. Dual Watch Settings
The Dual Watch mode lets you to monitor
two channels at the same time. While in
dual watch mode, the unit will monitor
both the currently selected channel and a
second dual watch channel.
To set the Dual Watch Mode:
From the Standby mode;
1. Press the
MODE
key FIVE (5) times to
select the Dual Watch setting mode.
The icon will flash on the display.
2. Press the or keys to select
the Dual Watch channel number.
To disable the Dual Watch Mode
altogether select
oFF
.
3. Press and hold the
MODE
key (or press
the
PTT
key momentarily) to confirm
and store your Dual Watch channel
selection. will be displayed at the
top of the LCD and the display will
now alternate between the currently
selected channel and the Dual Watch
channel.
To EXIT the Dual Watch mode:
Momentarily press the
SCAN
key. This
is equivalent to setting the DW mode
to
oFF
.
Dual Watch Operation:
• If a signal is received on the Dual
Watch channel, the radio will pause on
that channel for as long as it remains
busy, then resume the Dual Watch 5
seconds after the last transmission has
ceased.
• If you wish to talk on the busy channel,
press the
PTT
switch while the radio is
locked onto that channel then talk in
the usual way.
• If you wish to talk on the selected
channel, press the
PTT
switch while no
signals are being received. The radio
will switch to the selected channel.
6. Squelch
The Squelch mode lets you adjust the
receiver sensitivity. The higher the squelch
level is set the stronger the signal needs
to be to be received by the radio.
To set the Squelch:
1. Press the
MODE
key SIX (6) times to
select the squelch setting mode. ‘SQ’
will be displayed.
2. Press the or keys to set the
Squelch level. To disable the Squelch
select oFF.
3. Press and hold the
MODE
key (or press
the
PTT
key momentarily) to confirm
and store your Squelch level selection.