beautypg.com

GME TX3340 User Manual

Page 3

background image

t X 3 3 4 0

i n s t r u c t i o n m A n uA l

PA G E 3

INTrOdUCTION

your GmE tX3340 80 channel is Australian designed and built
and is the most advanced uhF citizen Band radio available.
the tX3340 combines the very latest in electronic hardware
with the most up-to-date computer aided design and
manufacturing techniques to produce an extremely compact
mobile radio with outstanding specifications and performance.
the tX3340 with its controller microphone is designed for
unobtrusive mounting in modern vehicles. the radio case
with its built-in loud speaker and extremely small size can be
mounted in almost any convenient location.

NOTE: the citizens radio service is licenced in Australia by
AcmA radiocommunications (citizens Band radio stations)
class licence and in new Zealand by mEd General user radio
licence for citizens Band radio and operation is subject to
conditions contained in those licences.

IMPOrTANT INFOrMATION

CONCErNING 80 CH UHF CB rAdIO

the use of the citizen Band radio service is licensed in Australia

by the AcmA radio communications (citizens Band radio

stations) class licence and in new Zealand by the ministry of

Economic development new Zealand (mEd). A General user

radio licence for citizens Band radio and operation is subject to

conditions contained in those licences.

the class licence for users and equipment operating in the cB/Prs

477 mhz band has been amended. this radio meets the new 80

channel standard.

in simple terms the same amount of spectrum is available;

however, radio transceivers can now operate in a narrower

bandwidth and hence use less spectrum. these radios are

generally referred to as narrowband or 12.5 khz radios. By using

12.5 khz channel spacing instead of 25 khz, the 40 channels

originally allocated can now be expanded to 80 channels thereby

doubling the channel capacity and relieving congestion in the uhF

cB/Prs band.

original 40 channel wideband radios will continue to operate on

the original 40 channels, however they will not be able to converse

on the newer channels 41 – 80. the newer narrowband radios will

be able to converse with all older 40 channel wideband radios on all

channels 1 to 40 as well as the newer channels allocated from

41 to 80.

the mixing of narrowband and wideband radios in the same

spectrum can cause some possible operating issues of interference

and varying levels of received volume.

Possible issues

When a new narrowband radio receives a transmission from an
older wideband radio the speech may sound loud and distorted
- simply adjust your radio volume for best performance.

When an older wideband radio receives a signal from a new
narrowband radio, the speech may sound quiet - simply adjust
your radio volume for best performance.

depending on how close your receiving radio is to another
transmitting radio, there can be interference from the
transmitting radio if it is using a channel adjacent to the
channel you are listening to. simply try going up or down a
few channels from the currently selected channel. the above
situations are not a fault of the radio but a symptom of
operating wideband and narrowband radios in the same
bandwidth. this possible interference will decrease over time as
the population of wideband radios ages and decreases.

Further information and updates are available from the
Australian communications and media Authority (AcmA) at
www.acma.gov.au and the ministry of Economic development
(mEd), radio spectrum management at: www.rsm.govt.nz

ACCESSOrIES SUPPlIEd

• Main Radio Unit
• Mounting Cradle
• Instruction Manual
• MC520B LCD Microphone
• Microphone Clip

• DC Lead
• Screw Pack

if any items are missing or
damaged, please contact your
retailer or place of purchase

.