GME TX3200 - Manual (Page 7)

the PRI key. Scan will be cancelled.
• To hold onto a busy scan channel, briefly
press the SCAN key while the channel is
busy. The radio will exit the Scan mode and
will remain on that channel. Press
SCAN
again to continue scanning.
• To cancel the Scan mode, briefly press the
SCAN key. A low beep will be heard and
“
SCAN” will disappear from the display.
If the radio was on a busy channel it will
remain on that channel, otherwise it will
return to the priority channel.
Turbo Scan
The TX3200 scans at 20 channels per second
by default. The scan speed can be slowed to
10 channels per second if required by pressing
and holding the
SCAN key for a few seconds
while the radio is scanning. Press and hold the
SCAN key again to return to the 20 channels
per second scan rate.
TIME-OUT TIMER
The TX3200 has a built-in time-out timer which
automatically disables the transmitter if the
push-to-talk switch is pressed for too long.
This feature prevents the channel from being
blocked for long periods should your push-
to-talk switch become jammed or pressed
accidentally. The time-out period is set to two
minutes by default, but can be changed or
even disabled by your dealer.
7