GME TX4500WS - Manual (Page 39)

W 1 I n s t r u c t I o n m A n uA l PA G E 7
External remote microphone mounting suggestions
PAIRINg
Before using your W1 you will need to ‘Pair’ it with your radio. this one-time
process uses a secure internal code to link your W1 exclusively with your
radio. once pairing has been completed, your radio will automatically identify
your W1 each time your radio is switched on and will reconnect without
further action from you.
To Pair your radio with your W1
1. switch your radio oFF.
2. Press and Hold the PTT button on your radio’s
hand microphone, then switch your radio on.
3. ‘PAIr’ will be displayed, the Ptt icon will flash and
the radio will beep slowly. release the PTT button.
4. now press and hold both Function keys on the W1.
5. After a few seconds the radio should beep 3 times and ‘Pair’ will disappear
from the display. the W1 is now paired with your radio.
NOTE: If you do not complete the Pairing process within 20 seconds the Pairing
function will time-out with a low beep and ‘PAIr’ will disappear from the display.
If this happens, restart the process at step 1.
RADIO MENU OPTIONS
once the W1 has been paired, a number of additional W1 menu items will
automatically become available on your radio.
Microphone Input
Your radio has two microphone sockets – on the front and rear panels. the
microphone Input selector allows you to choose which microphone socket will
Function keys