GME TX3120S - Manual (Page 30)

PA G E 3 0 I N S T R U C T I O N M A N UA L T X 3 1 2 0 S
FLIPPING THE DISPLAY
The TX3120S’s small size allows it to be mounted
in almost any convenient location. However the
most suitable location may sometimes require the
unit to be installed upside-down when referenced
to your driving position. The TX3120S is designed
to overcome this situation by allowing the display
to be ‘flipped’ so that it can be read in either
orientation. In addition the keys have symbols that
can also be read in either orientation.
To flip the display, please see the section ‘Flipping
the Display’ described under ‘General Operation’.
ANTENNA CONNECTION
It is essential to select a good quality, high
efficiency, 477 MHz antenna. A poor quality
antenna or one not designed for the specific
frequency band you are using will give very poor
performance.
GME have a wide range of suitable 477 MHz
UHF CB antennas to suit most installations and
applications. We recommend contacting your local
GME retailer for advice.
The antenna socket on the TX3120S is an
FME type. If your antenna cable uses a PL259
connector, connect it to your TX3120S using the
supplied FME adaptor.
FME Antenna Socket
FME Adaptor
PL259 Antenna Plug
DC Connector