GME GT9600 User Manual

Page 8

WARRANTY

GME limit this warranty to the original purchaser of
the equipment.
GME warrant this product to be free from defects in material
and workmanship for a period of twelve (12) months from the
date of purchase from their authorised retailer.

Should the product require servicing during this period, all
labour and parts used to effect repairs will be supplied free
of charge. GME reserve the right to determine whether
damage has been occasioned by accident, misuse or
improper installation whereby the warranty would be
void, including:

Equipment which has been damaged due to:

(a) Incorrect or reverse polarity connection to a battery or

power supply;

(b) Connection to incorrect supply voltage.

(d) Non-factory modifications.

(e) Use of incorrect replacement fuse.

Procedure to be followed by claimant: In the event of a
defect occurring during the twelve (12) month warranty
period, the original purchaser may return the defective unit
along with suitable proof of purchase date (i.e. receipt,
docket, credit card slip etc.) and a full description of the
defect to any authorised retailer.

All freight charges incurred for transportation by the retailer
or GME are the purchaser’s responsibility.

The retailer will forward the unit to the closest authorised
GME Service Depot in your particular area.

GME AFTER SALES SERVICE

Your GME GT9600 is especially designed for the
environment encountered in mobile or portable installations.
The use of all solid state circuitry, careful design and
rigorous testing, result in high reliability. Should failure
occur however, GME maintain a fully equipped service
facility and spare parts stock to meet the customer’s
requirements long after expiry of the warranty period.

PRECAUTIONS

Never attempt to remove the receiver covers or undertake
repairs. Should any maintenance be required it should only
be performed by a GME approved service centre.

Do not connect or disconnect any cables without first
turning off the receiver’s DC supply.

Do not expose the receiver to areas of extreme
temperature, high humidity, dust, steam, water, petroleum
products, smoke or direct sunlight.

Use only GME specified adaptors, power sources, amplifiers
or aerials.

Never use thinners or other chemical reagents to clean the
receiver, should cleaning be necessary use only a soft cloth.

Turn main power off and disconnect DC supply when the
receiver is not being used for extended periods of time.

Part Number: 310394 Drawing Number: 4 3 7 5 8 - 3