GME GT9600 - Manual (Page 4)

PA G E 4 i n s t r u c t i o n m A n uA l G t 9 6 0 0
REMOTE CONTROl FUNCTiONS
standBy (poWer)
switches receiver on from standby or off from standby.
numeric Buttons
selects channels or enters programming parameters.
arroWs left/right
in normal operating mode – increases or decreases volume.
in menu mode – moves highlighted cursor left or right.
arroWs up/doWn
in normal operating mode – channel up/down selection.
in menu mode – moves highlighted cursor up or down.
menu
Displays main menu on the screen.
tV/radio
switches receiver between tV and radio mode.
red/green/yelloW
Function selection via menu.
eXit
cancels menu selection and returns to the normal
viewing mode.
enter
in normal operating mode – displays channel list.
in menu mode – confirms selected menu function.
page up/doWn
moves the cursor to the next or previous page in the
channel manager and Favourites manager menu.
audio
Permits selection of left/right channels and stereo.
guide
Displays tV or radio program guide (if available).
mute
Disables or enables audio.
info
Displays current channel status/information.
recall
in normal operating mode – returns to last viewed channel.
bASiC OpERATiON
general functions
poWer on/off
slide the main power switch located on the rear of the
receiver to the on position. initially both the rED and
GrEEn lED indicators will illuminate. once the receiver
has locked in a signal, the rED indicator will turn off and a
picture will be displayed on the monitor.
standBy on/off
to turn the receiver oFF, momentarily press the red poWer
button on the remote control handset. the GrEEn lED indicator
will turn off and the rED lED indicator will illuminate.
to turn the receiver on, momentarily press the red poWer
button on the remote control handset. the rED lED indicator
will turn off and the GrEEn lED indicator will illuminate.
memory
the GmE AciEs ™ receiver has a non-volatile memory;
consequently all programmed data is retained even when
the power to the receiver has been completely switched off.
Volume
Press and hold the button to increase the audio level.
Press and hold the button to decrease the audio level.
mute
momentarily press the mute button to turn the audio off
(the screen will display ‘mutE’)
to restore the audio momentarily press the mute button,
the sound will be returned at the previous level.
channel selection
Press the or buttons to sequentially select channels.
input & output connections
the GmE AciEs ™ receiver has a number of rear panel
inputs and outputs (see page 7 for illustration).
MENU GUidE
main menu
Press the menu button to display the main menu.
• to select the desired sub-menu use the
buttons.
• Press enter to confirm the selection.
• Press the menu button to exit this menu, or press the
eXit button to return to the normal viewing mode.
automatic channel search
selecting the channel search mode will scan all available
channels and load them into the receiver’s
non-volatile memory.
to commence an auto channel search:
• Press the
menu button.
• move the cursor to ‘cHAnnEl sEArcH’.
• Press
enter to confirm.
• Press the or buttons to select country area,
confirm selection by pressing enter.