Notice – GMC 2002 Envoy User Manual
Page 291
5-7
9. Connect the other end of
the negative (
-
) cable to
the remote negative (
-
)
terminal on the vehicle
with the dead battery.
10. Now start the vehicle with the good battery and run
the engine for a while.
11. Try to start the vehicle that had the dead battery.
If it won’t start after a few tries, it probably
needs service.
NOTICE:
Damage to your vehicle may result from
electrical shorting if jumper cables are removed
incorrectly. To prevent electrical shorting, take
care that they don’t touch each other or any
other metal. The repairs wouldn’t be covered by
your warranty.
Jumper Cable Removal
A. Heavy, Unpainted Metal Engine Part or Remote
Negative (
-
) Terminal
B. Good Battery or Remote Positive (+) and Remote
Negative (
-
) Terminals
C. Dead Battery or Remote Positive (+) Terminal