GMC 2004 Sierra User Manual

Page 511

1. Put the tire on the ground at the rear of the vehicle

with the valve stem pointed down, and to the rear.

2. Tilt the retainer (D)

downward and through
the wheel opening.
Make sure the retainer
is fully seated across
the underside of
the wheel.

3. Attach the wheel wrench (H) and extensions (I)

together.

4. Insert the hoist end (F)

through the hole (G) in
the rear bumper
and into the hoist
shaft.

5. Raise the tire part way upward. Make sure the

retainer is seated in the wheel opening.

6. Raise the tire fully against the underside of the

vehicle by turning the wheel wrench clockwise
until you hear two clicks or feel it skip twice. You
cannot overtighten the cable.

5-111