GMC 2006 Canyon - Manual (Page 98)

Power Windows
The power window
switches for all windows
are located on the driver’s
door armrest. In addition,
each passenger’s door has
its own switch.
The power windows will work when the ignition is in
ACC (Accessory) or ON or while Retained Accessory
Power (RAP) is active. See Retained Accessory Power
(RAP) on page 2-17.
Pull the front of the switch up to raise the window.
Press the front of the switch down to lower the window.
Do not hold all four power window switches down for
several seconds after the windows have been
completely lowered or raised, because the vehicle may
blow a fuse.
Express-Down Windows
The driver’s window has an express-down feature that
allows the window to be lowered fully without
continuously holding the switch. Press the front of the
switch past the first position to activate the
express-down mode. The express-down mode can be
canceled at any time by pulling up on the switch.
Window Lockout
o
(Window Lockout): If you have a crew cab vehicle
with power windows, you will also have a window
lockout button located forward of the window switches.
This feature disables the passenger’s window
switches when the window lockout button is pressed.
To turn the lockout feature on or off, press the window
lockout button. A red band on the side of the button
can be seen when the windows are not locked out.
Crew Cab Switches
Shown
2-12