GMC 2006 Canyon - Manual (Page 58)

Crew Cab — Rear Seat
1. Put the child restraint on the seat.
2. If the child restraint manufacturer’s instructions
recommends that the top tether be attached,
attach the top tether to the top tether anchor (A).
Refer to the child restraint instructions and the
following steps:
2.1. Pull the seatback forward to access the top
tether anchors (A). See Rear Seat Operation
(Crew Cab) on page 1-10 or Rear Seat
Operation (Extended Cab) on page 1-12.
2.2. Route the top tether according to your child
restraint instructions and the following
instructions:
If the position you are using
has a fixed head restraint
and you are using a single
tether, route the tether over
the head restraint.
If the position you are using
has an adjustable head
restraint and you are using
a single tether, route the
tether under the head
restraint and in between
the head restraint posts.
1-52