beautypg.com

Replacing safety belt system parts after a crash, Airbag system, System -21 – GMC 2012 Sierra User Manual

Page 89: Introduction, Replacing safety belt system, Parts after a crash -21, Airbag system -21, Seats and restraints 3-21

background image

Black plate (21,1)

GMC Sierra Owner Manual - 2012 - CRC - 11/15/11

Seats and Restraints

3-21

Replacing Safety Belt
System Parts after a
Crash

{

WARNING

A crash can damage the safety
belt system in the vehicle.
A damaged safety belt system
may not properly protect the
person using it, resulting in
serious injury or even death in a
crash. To help make sure the
safety belt systems are working
properly after a crash, have them
inspected and any necessary
replacements made as soon as
possible.

After a minor crash, replacement of
safety belts may not be necessary.
But the safety belt assemblies that
were used during any crash may
have been stressed or damaged.
See your dealer to have the safety
belt assemblies inspected or
replaced.

New parts and repairs may be
necessary even if the safety belt
system was not being used at the
time of the crash.

Have the safety belt pretensioners
checked if the vehicle has been in a
crash, or if the airbag readiness light
stays on after you start the vehicle
or while you are driving. See Airbag
Readiness Light on page 5‑18
.

Airbag System

The vehicle has the following
airbags:

.

A frontal airbag for the driver.

.

A frontal airbag for the right front
passenger.

The vehicle may have the following
airbags:

.

A seat‐mounted side impact
airbag for the driver.

.

A seat‐mounted side impact
airbag for the right front
passenger.

.

A roof-rail airbag for the driver
and the passenger seated
directly behind the driver.

.

A roof-rail airbag for the right
front passenger and the person
seated directly behind the right
front passenger.