beautypg.com

GMC 2012 Sierra User Manual

Page 275

background image

Black plate (9,1)

GMC Sierra Owner Manual - 2012 - CRC - 11/15/11

Climate Controls

8-9

This mode recirculates and helps
to quickly cool the air inside the
vehicle. It can be used to help
prevent outside air and odors from
entering the vehicle.

The recirculation mode cannot be
used with floor, defog, or defrost
modes. If recirculation is selected
with one of those modes, the
indicator light flashes three times
and then turns off. The air
conditioning compressor also comes
on when this mode is activated.
While in recirculation mode, the
windows may fog when the weather
is cold and damp. To clear the fog,
select either the defog or defrost
mode and increase the fan speed.

The recirculation mode can be
turned off by pressing the outside
air button, or by turning off the
ignition.

;

(Outside Air): Press to turn the

outside air mode on. An indicator
light on the button comes on to
show that outside is on. When
selected, air from outside the

vehicle circulates throughout the
vehicle. The recirculation mode
cannot be used with the outside
air mode.

Rear Window Defogger

The rear window defogger uses a
warming grid to remove fog from the
rear window.

1

(Rear Window Defogger): For

vehicles with this feature, press
to turn the defogger on or off.
It automatically turns off several
minutes after it has been activated.
The defogger can also be turned off
by turning the engine off. Do not
drive the vehicle until all windows
are clear.

Notice: Do not use a razor blade
or sharp object to clear the inside
rear window. Do not adhere
anything to the defogger grid
lines in the rear glass. These
actions may damage the rear
defogger. Repairs would not be
covered by your warranty.

Heated Mirror: For vehicles with
heated outside rearview mirrors, the
mirrors heat to help clear fog or frost
from the surface of the mirror when
the rear window defog button is
pressed. See Power Mirrors on
page 2‑15
.

Sensors

The solar sensor, located in the
defrost grille in the middle of the
instrument panel, monitors the solar
heat. Do not cover the solar sensor
or the system will not work properly.