GIN Genie Race 3 - Manual (Page 31)

31
Wrap the Velcro around one side
of the line Tape both ends of the attachment
firmly to ensure the shackle does
not move
Pull tight on the Kevlar to make a
clean knot and fold onto the Velcro Pass the Kevlar through the loop
end Pass the loop end of the line
through the eyelet at the base
of the Kevlar Pass the Soft Shackle line through
the connections
2 times
1 2 3 4
5 7 6
Soft Shackle
7
Cover the Soft Shackle attachment
using the Maillon rapid cover
NOTE: Be sure to cover the
attachment to reduce movement
and eliminate abrasion.
IMPORTANT: GIN recommends
using the rapid cover however
tape may also be used if done
correctly
(x2)