GIN Genie Race 3 - Manual (Page 28)

Front rescue container installation guide
For installation first connect the provided red and black bridles to the front shoulder attach-
ments and then pass through the bridle tunnel (1).
Arrange the extra para-cord in an “S” pattern at the back of the rescue container (3). Place the
parachute into the rescue container with the handle attachment facing out (4). Then connect the
red and black bridle’s to your rescue. Gin Gliders recommend the use of the Soft Shackle.
Close the container by pulling the eyelets through the container flaps in the order shown below
(5-8). Finish by passing the plastic handle wire through the eyelets on the outside of the container
(9).
Make sure to follow this procedure carefully and consult a professional if in doubt.
28
2 1 3 1