GIN GTO 2 - Manual (Page 13)

13
TIP: Always follow a consistent method
of preparation and pre-flight checks
each time you fly.
Preparation for launch
Check the condition of your paraglider and other flying equipment before every flight.
Lay out your wing on its top surface in an arc. Make sure that the centre of the wing is higher
than the tips.
Prepare for launch by checking the following:
Is the glider fabric free from tears or other damage?
Are the lines free from knots, tangles or other damage?
Are the maillons connecting the lines and risers closed and secured?
Are your carabiners in good condition?
Are the risers in good condition?
Is your harness in good condition?
Is your speed system correctly connected?
Is your rescue correctly installed in your harness?
Is your rescue handle secure and rescue pin in?
Pre-flight check
Check the following before every take-off:
Is your personal equipment in order? (harness and helmet straps done up, reserve handle
secure and pin in, carabiners done up)
Are you holding the ‘A’ risers and brake handles?
Is the wing arranged in an arc with the leading edge open and into wind?
Is the wind strength and direction suitable?