Galaxy Audio RM2 User Manual
Page 19
playing the selected format.
l
Activates the zone memory function. During playback, press
to set the start point (A). Press
again to set the end point (B), and the
unit will repeatedly play from point A to point B. Press again to cancel the
Aà
B Function.
l
:MUTE Press once to mute audio. Press again to hear the audio. (The
track will continue to play even when muted.)
l
:ENTER (Confirm).
l
PITCH: Used to adjust speed and pitch of playback. Each press of
will increase the speed and pitch.
Each press of
will decrease the
speed and pitch of playback. Ten steps of speed/pitch are available.
Press
to return to normal speed/pitch.
l
Point the Remote Control towards the IR sensor on the front panel of the
CDM when in use. The optimal receiving distance is 3 meters. (The
maximum distance is 5 meters.) The remote control requires one
battery: (model CR2025 3V)
l
To install the battery:
1. Press and hold the tenon located on lower left-hand corner of the rear
of the remote control. Then pull out the battery tray by the slot at the
right.
2. Place the battery
positive side facing upwards for correct polarity.
3. Slide the battery compartment back into the locked position.
A B
A B
A B