Galaxy Audio CORE XP250 User Manual
Page 5
3
!
Explanations of controls and jacks are preceded by boxes.
A
WIRELESS MIC
B
WIRELESS MIC RECEIVER OUTPUT to CORE X250 MIC (XLR) INPUT: Channel 1, and/or 2, and/or 3
!
MIC IN (+24VDC phantom power) connects a microphone or other device which uses an XLR plug. Use
ONLY
balanced devices and cables.
!
LEVEL controls the amount (volume) of the channel’s signal that is sent to the MASTER mix.
!
AUX controls the amount (volume) of the channel’s signal that is sent to the AUX mix. This control is
post-
level, meaning the AUX control is active only when the LEVEL control is turned up.
C/D
CONDENSER OR DYNAMIC MIC to CORE X250 MIC INPUT: Channel 1, and/or 2, and/or 3
!
See
B
E
CORE X250 SPEAKER OUTPUT (REAR PANEL) to MAIN SPEAKER INPUT
!
REAR PANEL (¼”) SPEAKER OUTPUT This
speaker level (powered) output sends the post-EQ master
mix to the main speaker.
F
TAPE/CD PLAYER OUTPUT to CORE X250 (¼”) LINE INPUT or TAPE (RCA) INPUT: Channel 4
!
BALANCED (¼”) LINE IN connects OUTPUT from an instrument.
!
CD/TAPE (RCA) INPUT connects OUTPUT from a tape or CD player.
!
LEVEL and AUX controls function as in B, C and D.
The ¼” and RCA jacks are parallel. If both are used, sound quality is diminished.
G
CORE X250 AUX OUTPUT to OUTBOARD PROCESSOR (reverb or similar device) INPUT
!
AUX OUTPUT The
pre-master, pre-EQ AUX mix (determined by the channels’ AUX control settings) is
available at this ¼”
line level (unpowered) output
H
OUTBOARD PROCESSOR (reverb or similar device) OUTPUT to CORE X250 AUX RETURN INPUT
!
AUX RETURN (AUX IN) BALANCED (¼”) LINE INPUT accepts the
line level (unpowered) signal from an
outboard processor. This input’s LEVEL control determines the amount of the “wet” (processed) signal that is
added to the MASTER mix.
I
CORE X250 LINE OUTPUT to RECORDER INPUT
!
LINE OUTPUT provides a
line level (unpowered) post-master, post-EQ version of the MASTER mix;
identical to the powered mixes available from either the front or rear SPEAKER OUTPUT jacks.
J
CORE X250 SPEAKER OUTPUT (FRONT PANEL) to SATELLITE SPEAKER INPUT
!
FRONT PANEL (¼”) SPEAKER OUTPUT provides a powered
post-master, post-EQ version of the
MASTER mix to an unpowered satellite speaker; identical in content to the
speaker level (powered) mix available
at
the rear (¼”) speaker output jack and the
line level (unpowered) mix available at the (¼”) LINE output jack.