Gaggia UNICA - Manual (Page 34)

• 34 • • 34 •
• When the machine is ready to brew
coff ee, press the button “ ” to select
the steam option.
• If you want to heat up the milk directly
in the cup, immerse the steam wand
(Pannarello, if supplied) in the milk to
heat up.
• The icon blinks during the preheating
time required by the machine.
• Turn the knob clockwise and set it to
the “ ”position.
• The same procedure can be used to heat
other beverages.
After using the steam wand (Pannarello,
if supplied), wash it as described in the
"Cleaning and Maintenance" section.
After using steam, to prepa-
re a beverage the machine
has to be brought back to the right
temperature. Perform the operations
indicated in the following section.
Blinking
Steady on
• After dispensing steam for the desired
time, turn the knob counter-clockwise
and set it back to the “ ” position to
stop dispensing steam.
• Turn the knob clockwise and set it to
the “ ”position.
• Brew until only steam is dispensed.
Then, turn the knob counter-clockwise
and set it back to the “ ” position to
stop dispensing.
• Fill 1/3 of the container you wish to use
to prepare cappuccino with cold milk.
To ensure better results when
preparing a cappuccino, use
cold milk straight from the fridge.
• To discharge the water in the steam
wand, place a container under the
steam wand, (Pannarello, if supplied).
• When the symbol gets steady, the
machine is ready to dispense steam.
Rotate the container and move it
gently up and down to obtain uni-
form foam.