Gaggia UNICA - Manual (Page 32)

• 32 • • 32 •
Dispensing Spout Adjust-
ment
Most cups on the market can be used with
this coff ee machine.
The height of the dispensing spout may
be adjusted to better fi t the dimensions
of the cups that you wish to use.
Manually move the dispensing spout up
or down to adjust its height by placing
your fi ngers as shown in the fi gure.
The recommended positions are:
For the use of small cups;
COFFEE BREWING
Note: Should the machine not
brew coff ee, make sure that
the water tank contains water.
Before brewing coff ee check
the lights on the display and
make sure the water tank and coff ee
bean hopper are full.
Leave the knob on the “ ”
position during the brewing
phase.
Before brewing coff ee, adjust
the height of the dispensing
spout according to your needs.
Using Coff ee Beans
• To brew coff ee, press and release:
the “ ” button for an espresso cof-
fee;
the “ ” button for a long coff ee.
• The brewing cycle then starts:
To brew 1 cup of coff ee, press the “ ”
or “ ” button once. This icon will be
displayed.
To brew 2 cups of coff ee, press the “ ”
or “ ”button twice. The display will
show this icon.
To brew 2 coffees, the ma-
chine automatically grinds
and doses the correct amount of
coff ee. Brewing two coff ees requires
two grinding cycles and two brewing
cycles, which the machine carries out
automatically.
• After the pre-dispensing cycle, coff ee
begins to come out of the dispensing
spout.
Steady on
Steady on
Steady on
For the use of large cups.
• Two cups/mugs can be placed under
the dispensing spout for brewing two
coff ees at the same time.