FXpansion VST to RTAS Adapter v2.0 User Manual
Page 14
14
FXpansion VST to RTAS Adapter v2.0
Working with multiple-output instrument plug-ins
Some instrument plug-ins have more than one stereo output. Please run the
Adapter configuration program and inspect the ‘Out’ parameter in order to verify
the number of outputs for your instrument plug-ins.
When using such instrument plug-ins, the primary stereo output pair is routed to
the output of the Instrument track on which the plug-in is inserted.
To hear each extra output:
1. Create an Aux track. Whether it is mono or stereo depends upon the output
configuration of the plug-in itself. Most multi-out plug-ins have extra stereo
outputs, so you would create stereo Aux tracks for these. However, some
plug-ins have extra mono outputs, or a combination of mono and stereo.
Please refer to the plug-in vendor’s documentation for further guidance on the
types of outputs required for each plug-in.
. Click the Input selector for the Input menu to be displayed. Any extra outputs
from plug-ins are displayed in the ‘plug-in’ section of the menu. After clicking
on the desired plug-in output, the Aux track will monitor the signal from that
output.