Connect the dvd video player to your tv, Connecting to a tv, Setting of the sound output – Philips DVD840 User Manual
Page 12: Notes, Headphones connection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections J For details of output sound, see 5^ ■
Connecting to a TV
Connect the DVD video player to your TV.
Connecting to a TV
Setting of the sound output
From the on-screen displays, set “AUDIO OUT SEL.” to “ANALOG/PCM.”
To wall outlet
If your TV has an RF (Antenna In) jack only, use an RF
modulator (not supplied) to connect the DVD player to
your TV.
Notes ---------------------------------------------------
See your TV owner’s manual
for details.
►
Refer to the owner’s manual of the connected TV as well.
* When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
* If your television set has one audio input, use a Y cable adapter (not supplied) to connect to your TV.
►
Connect the DVD video player directly to your TV. If you connect the DVD video player to a video cassette recorder (VTR), or TVA/TR
combination or video selector, the playback picture will be distorted because DVD video discs are copy protected.
Headphones connection
Connect headphones that have a stereo large
size connector.
Before connecting, temporarily lower the sound
volume, then adjust the volume.
Down Up
11