Cisco WIP300 - Manual (Page 19)

Wireless-G IP Phone
10 Chapter 3: Installing and Using the Wireless-G IP Phone
Charging the IP Phone’s Battery
Charging the IP Phone’s Battery
1. Connect the small end of the included AC power adapter to the USB mini-B port on the bottom of the IP Phone.
2. Plug the other end of the adapter into a standard electrical outlet.
You see a charging indicator on the LCD screen
When the Battery charging indicator remains solid blue, the battery is fully charged and ready for use.
When the battery is fully charged, proceed to “Setting up the Wireless-G IP Phone” on page 9.
Note: Allow the battery to charge for eight hours before initial use.
USB mini-B port