Cabletron Systems 5500 - Manual (Page 30)

9032208 E4 Device Views
2-9
Interface Device View
Gauge Type
This area of the Gauge Control Panel allows you to select either a numeric or
linear display on the Gauge Label.
Gauge Buttons
This area of the Gauge Control Panel provides the following buttons:
Applies the current settings to the Gauge label temporarily, but does not save
the settings.
Returns the settings to the previously saved values.
Saves the current settings while SpectroGRAPH is running. Settings return
to default when you restart SpectroGRAPH.
Closes the Gauge Control Panel.
Returns the settings to the SPECTRUM default.
Apply
Reset
Keep Settings
Close
Default