Cabletron Systems 5500 - Manual (Page 25)

Interface Device View
Interface Icons
Device Views Cisco Catalyst 5000/5500 Hub
2-4 Management Module Guide
Interface Label
This label displays the interface (port) number.
Administrative Status Label
This label displays the status of this interface. Double-click this label to open
the Interface Status view which allows you to view the operational state of
that interface, and select the administrative status (enable or disable the
port).
Table 2-1 lists the possible states and their descriptions.
Interface Type Label
This label displays the interface type. Some of the possible interface types are
Ethernet, FDDI, T1, PPP, and Reg1822.
MAC Address Label
This label displays the MAC address of this device. Double-click this label to
open the Interface Address Translation table.
Interface Address Translation Table
This table cross-references device IP addresses to device MAC (Physical)
addresses for selected nodes between networks. Double-click any column
entry to open an address-speciÞc Address Translation Table Information view.
The Interface Address Translation Table provides the following information:
Interface Index
A list of interfaces held by the device.
Physical Address
Displays the physical (MAC) address of the interface.
Table 2-1. Administrative Status Label Descriptions
Color Status Description
Green ON Port is operational.
Blue OFF Port is off.
Yellow TESTING Port is in the test mode.