Iiloaig, Id playback – Philips CD 911 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

(ID PLAYBACK
m
3
(Q_
ifl'
3
"
NORMAL PLAYBACK
(PLAY/REPLAY)
NOTE!
Use only audio CDs; no CD-ROM, CD-1 or CDV
• Press POWER /STANDBY OFF 1 to switch the player on
- Open the CD compartment by pressing OPEN/CLOSE 8
- OPEN lights up.
• Insert an audio CD,
printed side up,
and close the compartment.
iiloaig
DIGITAL AUDIO
- CLOSE lights up, followed by READ. The number of tracks and the playing time of the CD
are shown on the display.
Press PLAY/REPLAY 77 to start play.
You can also press PLAY/REPLAY immediately after inserting the CD; the compartment
then closes automatically.
You can also close the CD compartment by pressing its front; playback will then start
automatically.
The number indicator shows how many tracks are on the CD; when a track has been
played its number disappears.
■1
'2
3
4
5
6
-7
The track being played is always shown under TRACK and its elapsed playing time is
shown under TRACK TIME.
- Play will stop after the last track.
• Press POWER /STANDBY OFF 7 to switch the player off.
You can interrupt playback by pressing PAUSE 72; PAUSE then lights up.
Press PLAY/REPLAY 77 to restart; if you first press PAUSE again and then PLAY/REPLAY,
the current track starts again from the beginning.
You can also restart play by pressing SCAN 20, SHUFFLE 75 or the 1-0 digit keys 3.
If you press PLAY/REPLAY during play, the current track starts again from the beginning.
You can stop playback by pressing STOP/CP 70 or OPEN/CLOSE 8.