Philips CD 911 - Manual (Page 10)

PLAYBACK
m
3
‘S.
5)'
3"
CALLING UP OTHER TIME INFORMATION
(TIME)____________________________
• Press TIME 15
wheneveryou want
to know the remain­
ing playing time of
the track being played (REM TRACK TIME).
• Press TIME again
if you wish to know
the remaining playing
time of the entire CD
(TOTAL REM TIME).
• Press TIME again
if you wish to return
to the elapsed play­
ing time indication of
the current track (TRACK TIME).
SETTING THE FADE- IN AND FADE-OUT
TIME (FADER)__________________'
NOTE!
The FADER function
can be used if the
player is connected to
the amplifier or the
system via the
ANALOG OUT output or the DIGITAL OUT output.
O GO
• Dur/ngp/ay press FADER 79.
- The sound level will now gradually decrease
(FADE OUT), after which the player will go into
the PAUSE mode.
^___ j—
r-5 .
1
• • ■ ------------
1 . t — — —
SEARCHING THE LOUDEST PASSAGE
(PEAK SEARCH)___________________
• In STOP mode, press PEAK SEARCH 7.
- The CD or the programme will now be scanned
for the loudest passage (the peak).
- The display shows
the track being
scanned and its
elapsed playing time.
- When the loudest passage has been found it
will be repeated continuously (from 2 seconds
before the peak until 2 seconds after the peak)
• You can now adjust your recording device.
• You can stop the scan by pressing STOP/CP
10
or OPEN/CLOSE 8; if you press PLAY/REPLAY
11, the CD or the programme will be played
from the beginning.
Press FADER again.
Play continues and the sound level will increase
again to the originally set level (FADE IN).
h n D
e
: _
1» I—
1 ^ t—.
P* ^ r4
10