Playing the programme (play/replay), Erasing a programme, In play mode – Philips CD 911 User Manual
Page 11: Erasing a track from the, Programme (clr), Storing a programme, Erasing a track from a programme, Programming, Storing a programme (prg and 1-0), Stop/cp, clr or open/close)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PROGRAMMING ^
STORING A PROGRAMME (PRG and 1-0)
You can store 30 tracks from each CD in any required sequence in a programme.
NOTE!
- FULL lights up if you exceed the maximum of 30 tracks.
- NOT POSSIBLE will light up if you select a non-existent number.
- USE 0-9 lights up if you press or Awhile programming.
• In STOP mode, press PRG (programme) 5 to open the memory.
- PROG lights up and ESDI starts flashing.
• Key in the required numbers; every number you key in will be directly included in the
programme.
- Each time you key in {= store) a track number, the number of tracks and the playing
time of your programme will be shown under TRACK and TOTAL TIME.
- The track number indicator always shows which numbers have been stored.
• Press PRG (programme) 5 to quit the PROGRAMME mode.
• Press PLAY/REPLAY 11 to play the programme.
£
,!2
"5)
c
w
CHECKING THE PROGRAMME (REVIEW)
• Press REVIEW 17 prior to, during or after pro
grammed play.
- All the numbers
appear in the
programmed
sequence under
TRACK; under TRACK TIME you will see the
playing time of each track.
NO PROG lights up if no track numbers have yet
been stored.
With REVIEW you can proceed more rapidly to
the next block of information.
PLAYING THE PROGRAMME (PLAY/REPLAY)
•
• Press PLAY/REPLAY 11.
- Playback starts with the first number of the
programme.
All keys (except, PRG (programme) 5, CLR (clear)
4,
EDIT 6 and PEAK SEARCH 7) can be used
during programmed play.
Search for a particular passage is only possible
within the track being played.
ERASING A PROGRAMME
(STOP/CP, CLR or OPEN/CLOSE)_____
In PLAY mode:
• Press OPEN/CLOSE Sor STOP/CP
10
(twice).
In STOP mode:
• Press OPEN/CLOSE 8, CLR (clear) 4 or
STOP/CP
10.
- The programme has now been erased.
ERASING A TRACK FROM THE
PROGRAMME
(CLR)_________________
• Press REVIEW 77 before or after programmed
play (STOP mode).
- All the numbers appear in the programmed
sequence under TRACK.
• Press CLR (clear) 4 as soon as the number you
wish to erase, appears.
- The number disappears from the number
indicator; it has now been erased.
- The display shows
the remaining tracks
and programme time
for a few seconds.
NO PROG lights up if no track numbers have yet
been stored.
11