Philips CD 911 - Manual (Page 14)

SYSTEM ASPECTS ADDITIONAL INFORMATION
m
3
(O
AUTOMATIC SOURCE SELECTION
If the AUTO SELECT button on the amplifier is
pressed, the CD player will automatically be
selected as the source, as the soon as you press
PLAY/REPLAY 11, SCAN 20 or SHUFFLE 13.
AUTOMATIC STOP_____________________
If the AUTO SELECT button on the amplifier is
pressed, the CD player will automatically go into
the PAUSE mode as soon as another source in
the system is selected (except when EDIT or CD
DUBBING is active).
STAND BY____________________________
• With the STAND BY button on the remote
control of the system you can set the player to
STAND BY mode.
The player will go to STAND BY mode auto­
matically if the whole system is set to
STAND BY mode.
- If the CD compartment was open, it will now
close,
- Any programme present, will be erased.
• Press any of the following buttons to cancel the
STAND BY mode;
PLAY/REPLAY 77, STOP/CP 10. SCAN 20.
SHUFFLE 73,1-0 3, EDIT 6, OPEN/CLOSE 8.
!◄ ►! 3, or PRG (programme) 5.
TIMER________________________________
Using the TIMER function you can have playback
(of a CD or a programme) started at a
particular time; for this refer to the operating
instructions of the tuner (e.g. FT930).
MAINTENANCE
The CDs
• Never write on the printed side of a CD.
• Do not attach any stickers to the CD
• Keep the shiny surface of the
of the disc clean.
Use a soft lint-free cloth and
always wipe the disc in a
straight line from centre to
edge.
• Never use cleaning agents
for conventional records.
• Detergents or abrasive cleaning agents should
not be used either.
The CD player
• A chamois leather slightly moistened with
water is sufficient for cleaning the player.
• Do not use cleaning agents containing alcohol,
spirits, ammonia or abrasives.
CONNECTING HEADPHONES (PHONES)
Connect headphones
with a 6.3 mm jack
plug to the PHONES
socket 16.
The sound level is
adjusted with the
LEVEL control 18.
I
16 18_______________
14