Futaba GY701 User Manual
Page 32
G
YRO
B
ASIC
S
ETTING
32
This sets the gyro’s fundamental functions. The
menu (4) Servo limit point setting should be set
first.
(1) Start display
T h e e d i t i n g m e n u s a r e
scrolled by pushing the mode
+ or – key.
(2) Servo type [default: DG:1520]
Selection of the servo type to be used. The
SERVO
DG 760: BLS251, S9256, S9251
DG 1520: BLS254, BLS257, S9254, S9257
(3) Gyro direction
[default: Normal]
Setting the gyro operation direction. Set the direc-
tion as the gyro operates the servo to right direc-
tion when the helicopter moves to left. The direc-
tion is changed by pushing the data+ or – key.
Push MODE
+/– key
ｎWARNING
ｊ This parameter must match the type of ser-
vo you are using. Incorrect setting may damage
the GY701 or the servo, possibly resulting in a
loss of control during flight.