Carrier 48PG20---28 - Manual (Page 8)

8
LOCK-OUT
TAG
ON
OFF
MAIN
STEP 1 STEP 2
STEP 3
STEP 4
STEP 5
STEP 6 STEP 7
Run Status
Service Test
Temperature
Pressures
Setpoints
Inputs
Outputs
Configuration
Time Clock
Operating Modes
Alarms
Alarm Status
ENTER
MODE
ESCAPE
OFF
ON
CONTROL I.D.
LABEL
1/4˝ X .032˝ MALE SPADE
TERMINALS (2) COMMON
SWITCH (SHIPPED IN
“ON” POSITION)
C09579
Fig. 5 -- To Shut Unit Off (Units with ComfortLinkt Control)
If unit is being shut down because the heating season has ended,
restore electrical power to the unit and take control out of Service
Test mode to ensure operation of the cooling system during the
cooling season.
MAINTAINING YOUR UNIT
All maintenance should be handled by skilled, experienced
personnel. Your dealer can help you establish a standard
procedure.
For your safety, keep the area around the unit clear and free of
combustible materials, gasoline and other flammable liquids and
vapors.
To assure proper functioning of the unit, flow of combustion and
ventilating air must not be obstructed from reaching the unit.
Clearance of at least 6 ft on all sides is required.