Flyzone FLZA2030 - Manual (Page 7)

Unpower the model before attempting to reverse the control throws.
Before flight, center rudder control
surface with rudder trim adjustment. Before flight, center elevator control
surface with elevator trim adjustment.
Press and hold one of the corresponding
control surface trim buttons and cycle the
power to reverse any control surface.
7
CENTER THE CONTROL SURFACE DIRECTION
REVERSE THE CONTROL THROWS
Keep hands and onlookers clear of propeller during arming and operation.
Throttle control stick is in the low
or minimum position. Return the throttle control stick to
the minimum position. «Beep Beep»
The motor is now armed. Raise the throttle control stick
to the maximum or high position.
«Beep»
ARM THE PROPELLER