Flyzone FLZA3332 - Manual (Page 5)

5
❏
3. Install the horizontal stabilizer onto the fi n, aligning the
openings in the horizontal stabilizer with the tabs on the fi n.
❏
4. Install the 2.8 mm x 25 mm machine screw into the top
of the horizontal stabilizer. Tighten the screw to secure the
horizontal stabilizer to the fi n.
Assemble the Wing
❏
1. Locate the motor pod. Install the motor wires through
the hole in the top of the wing, pulling them through the wing
until the pod rests against the top of the wing.
❏
2. Secure the pod to the wing with two 4.75 mm x 50 mm
nylon bolts.