Flyzone FLZA2052 - Manual (Page 8)

8
Keep hands and onlookers clear of propeller during motor arming and operation.
Throttle control stick is in the low
or minimum position. Return the throttle control stick to
the minimum position. «Beep Beep»
The motor is now armed and the
propeller will operate if the throttle
stick is raised. Raise the throttle control stick
to the maximum or high position.
«Beep»
ARM THE PROPELLER
Unpower the model before attempting to reverse the control throws.
To reverse the direction of any control surface,
press and hold one of the corresponding control
surface trim buttons and cycle the power.
TTX402 RUDDER PREFERENCE:
To move the rudder control function from the right
stick to the left stick, (with the
model unpowered) hold both
sticks to the upper outer
corners while cycling the
power on and then off.
g
REVERSE THE CONTROL THROWS
Before flight, center rudder control
surface with rudder trim adjustment. Before flight, center elevator control
surface with elevator trim adjustment.
CENTER THE CONTROL SURFACES