Specifications – Classe Audio SSP-300 User Manual
Page 59
59
Specifications
All specifications are accurate at the time of printing. Classé reserves the right to
make improvements without notice.
■
Frequency response
DC – 200kHz ± 0.1dB
■
Distortion (THD + noise)
0.003%
■
Maximum input voltage (single-ended)
5Vrms
■
Maximum input voltage (balanced)
10Vrms
■
Maximum output voltage (single-ended)
10Vrms
■
Maximum output voltage (balanced)
20Vrms
■
Gain range
-100dB to +14dB
■
Input Impedance
100kΩ
■
Output Impedance (main output)
100Ω
■
Signal-to-noise ratio (ref. 10Vrms input)
100dB
■
Channel separation
better than 100dB
■
Crosstalk (any input to any output)
better than -120dB @ 1kHz
■
Rated power consumption
30W
■
Idle power consumption
29W
■
Mains voltage
determined by the needs of country for which
the unit was manufactured; cannot be reset by dealer or user
■
Overall dimensions
Width: 17.5” (445mm)
Depth: 16.5” (419mm)
Height: 4.75” (121mm)
■
Net weight
26 lbs (11.8 kg)
■
Shipping weight
33 lbs (15 kg)
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX
+1 (514) 636-1428
Internet: http://www.classeaudio.com
email:
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine,
Canada. All rights reserved.
i-Command
™
is a trademark of Equity International, Inc. All rights reserved.
AMX
®
is a registered trademark of AMX Corporation of Richardson, TX. All
rights reserved.
Crestron
™
is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All
rights reserved.
Dolby, Pro Logic, Surround EX and the double-D symbol are trademarks of
Dolby Laboratories.
DTS and Neo:6 are trademarks of Digital Theater Systems, Inc.