Classe Audio SSP-300 - Manual (Page 39)

39
Touching the mode button brings up a scrolling list of the available surround
modes.
Touching either of the arrows will cause this list to scroll in the direction you
indicated. When you see the surround mode you want, touch its name in the
list. The SSP-300 will immediately change its processing to meet your request.
You may then either touch the back button at the top left, or simply wait for the
touchscreen to timeout and return to the Home Menu on its own.
video preview The video preview button on the Home Menu allows you to select a source
that will be previewed on the LCD screen itself. This allows you to “cue up” a
particular scene, or to get past the copyright warnings on DVDs, without your
audience seeing anything other than what you would like them to see.
To use the video preview feature, touch video preview on the Home Menu, and
then select the video source you wish to preview. When you are ready for the rest
of the audience to see the source on the main display, simply select it as usual, in
the Main Source Select menu.
Please note that the video preview feature does not support progressive video
such as 480p and 525p, nor HD video standards such as 720p and 1080i.
controls The Controls Menu offers user adjustments for a variety of processor functions,
such as various system trims (audio levels, delays, etc.), control over the remote
zone, and selection of your primary listening position.
You should think of these as temporary adjustments, similar to adjusting
the volume control; if you want to recalibrate the audio levels because of an
equipment change, you should do so in the Speaker Setup Menu, not here.